Very high strength mortar reinforced with steel needles for industrial floors.

FERRODUR® 600 E is a mortar made of special cements, selected siliceous aggregate, admixtures
and steel needles, with very high strength and no shrinkage, specially indicated for industrial
floors and raceways with thicknesses between 10 and 30 mm. It complies with the requirements
of standard EN 13813.

Fields of application
Industrial floorings that require high, mechanical, wear and impact resistances. Repairing potholes, raceways, joints in airport runways and bridges. For running rails in wastewater treatment plants. Truck transit areas in workshops, store rooms, etc. Repairing roadways and pavements.
Very high mechanical strengths, without shrinkage. Great abrasion and impact resistance. Monolithic adhesion strength to the concrete, preparing the base appropriately. Resistance to freezing temperatures and gritting salts. High fatigue resistance thanks to the reinforcement of the steel fibres. Chloride-free. Good levelling capacity.


Approximately 2.1 kg of FERRODUR® 600 E is needed per m2 and mm thickness. This amount is theoretical and depends on the condition and roughness of the substrate, and so it must be adjusted directly on site.


25 kg Bags.



Technical datasheet

Safety datasheet

Declaration of performance