_AISTERM_CONECTOR_IMD.jpg "PR449BI736_6511_PROPAM(r)_AISTERM_CONECTOR_IMD.jpg")
CONNECTOR: Accessory for connecting sections together, facilitating their precise adjustment.
It is installed by fitting the sections to be connected, inside it. Length 30 mm.
_AISTERM_TORNILLO_PERFIL_ARRANQUE_IMD.jpg)
STARTING SECTION SCREW: Flat-headed, multi-material hammer plug with zinc plated screw nail, ideal for starting section. Attaches to all surfaces.
SPACER: Accessory for compensating irregularities in the façade. The different measurements can be combined, or you can use a thickness of 3, 5, 8, 10 or 15 mm. It is inlaid in the plug, between the wall and the section.
CONNECTOR: Accessory for connecting sections together, facilitating their precise adjustment. It is installed by fitting the sections to be connected, inside it. Length 30 mm.
PVC section for clipping onto starting section, suitable for plastering up to 6 mm.
PVC ledge section with alkaline resistant fibreglass net for the PROPAM® AISTERM SYSTEM outside thermal insulation system.
Section for angled expansion joints with a soft PVC central part for the thermal insulation system on the outside PROPAM® AISTERM SYSTEM.
Section for expansion joints with a soft PVC central part for the thermal insulation system on the outside PROPAM® AISTERM SYSTEM
Adhesive PVC section with protection lip and alkaline resistant fibreglass net (4×4 mm) to obtain exact joints with the door and window frames in the PROPAM® AISTERM SYSTEM.
PVC corner piece with alkaline resistant fibreglass net and drip groove, 2.5 m long for protecting the horizontal corners in the PROPAM® AISTERM SYSTEM.
Rolled PVC corner piece with alkaline resistant fibreglass net (4×4 mm).
PVC corner piece with alkaline resistant fibreglass net, 2.5 m long for the PROPAM® AISTERM SYSTEM.
Aluminium section, 2.5 m long, and unified groups of thickness, for protecting the top of the PROPAM® AISTERM SYSTEM.
Aluminium section, 2.5 m long, for closing the vertical side of the PROPAM® AISTERM SYSTEM. Adapted to the insulator thickness.
Aluminium section with drip groove, 2.5 m long, for aligning and supporting the PROPAM® AISTERM SYSTEM.
Complete this form and we will contact you as soon as possible 🙂
EVENTOS: SEVILLA 14/12 : NETWORKING ACTIVO, REGÍSTRATE AQUÍ
PROPAMSA
SERVICES
PRODUCTS AND SOLUTIONS
CONTACT
C/ Ciments Molins s/n
Pol. Ind. Les Fallulles
08620 Sant Vicenç dels Horts
Barcelona
